Pump Repair & Rebuilds
Shop and field repair support for worn, damaged, leaking, or inefficient pump equipment.
How RMS Approaches It
Diagnosis before replacement.
The goal is not simply to make a motor turn. RMS inspects the pump, wear surfaces, seals, bearings, impeller, shafting, and installation conditions that may have contributed to the failure.
Typical service scope
- Pump removal, inspection, cleaning, and repair recommendations
- Seal, bearing, shaft, impeller, wear-surface, and service-component work as required
- Reassembly, alignment checks, rotation verification, and operating observations
- Practical repair notes for future maintenance planning
Applications
Systems this service supports
Related Support
Connected service paths
Mechanical troubleshooting for vibration, seal leakage, bearing wear, coupling issues, and recurring component failures.
Pump Troubleshooting & Field ServiceOn-site diagnosis for pump systems that are underperforming, offline, cycling, vibrating, leaking, or not maintaining pressure.
Pump System Upgrades & RetrofitsPractical retrofit support for aging pump equipment, changing duty requirements, and reliability improvements.
Common Failure Conditions
Symptoms RMS evaluates before recommending a repair path.
The goal is to identify whether the issue is hydraulic, mechanical, electrical, controls-related, or a combination of conditions affecting the complete pumping system.
Typical indicators
- Mechanical seal leakage or repeat seal failure
- Bearing noise, heat, looseness, or shaft wear
- Worn impellers, bowls, volutes, wear surfaces, or running clearances
- Declining capacity, efficiency, or operating stability
- Visible pump damage, corrosion, debris impact, or recurring mechanical failure
RMS Process
From first symptom to documented return-to-service.
RMS follows a practical workflow: understand the operating problem, verify the cause, perform the right work, test the result, and leave a usable service record.
Assessment
Collect symptoms, site context, equipment details, and urgency before assuming the pump is the only fault.
Diagnosis
Compare operating observations, current, pressure, flow, controls behavior, valves, and mechanical condition.
Recommendation
Separate confirmed repair needs from system-side issues and identify the practical return-to-service path.
Repair
Complete field service, shop repair, rebuild coordination, controls adjustments, or retrofit work within RMS's scope.
Testing
Verify rotation, pressure, drawdown, sequencing, leakage, vibration, current draw, and system behavior where applicable.
Documentation
Record post-service observations so future maintenance and troubleshooting have a usable baseline.
Service Territory & Qualifications
Established Oregon and Washington pump support.
RMS Pump has supported municipal, commercial, wastewater, domestic-water, fire-protection, and specialty pump applications since 2002.
Procurement-ready details
- Licensed, bonded, and insured in Oregon
- UBI: 602 651 292 | CCB#: 173135 | L.P.I Electrical: #153CPI
- Service territory: Oregon and Washington
- Public contact: info@rmspump.com
- Municipal capabilities statement
Technical Resources
Related service approaches and technical articles.
Vertical turbine vibration and capacity
Removal, inspection, rebuild, and baseline documentation scope.
ArticleMechanical seal flush plans
Seal support considerations for recurring leakage and premature failure.
ArticlePump parts and repair terms
Reference content for common pump components and repair discussions.
Need field support or a repair recommendation?
Send RMS the equipment symptoms, site context, and timeline so the right service path can be routed quickly.